BCMZX - V-100 HARDENER (B-022)
- MSDS: BCMZX
- Manufacturer: UNISORB MACHINERY INSTALLATION SYSTEMS
- Product Name: V-100 HARDENER (B-022)
- National Stock Number: 8030-00N006548
Product Identification
Product ID:V-100 HARDENER (B-022)
MSDS Date:01/01/1985
FSC:8030
NIIN:00N006548
MSDS Number: BCMZX
Responsible Party
Emergency Phone: 517-764-6060
Cage: 64128
Contractor
Telephone: 517-764-6060
Cage: 64128
Ingredients
CYCLOALIPHATIC AMINES (COMBINED W/POLYETHYLENE AMINES,
POLYETHYLENE AMINES.
Hazards
Effects of Overexposure:MAY CAUSE BURNS TO EYES/SKIN AFTER CONTACT.
EXCESS OVER-EXPOS MAY CAUSE SKIN SENSITIZATION.
First Aid
First Aid:EYES: FLUSH W/WATER AT LEAST 15 MIN. OBTAIN M EDICAL ATTN.
SKIN: WASH W/SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. EXCESS
INHAL: REMOVE PERSON TO FRESH AIR. OBTAIN MEDICAL ATTN.
Fire Fighting
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:FULL PROTECTIVE CLOTHING & SELF-CONTAINED
BREATHING APPAR.
Unusual Fire/Explosion Hazard:HAZARDOUS COMBUSTION PRODUCTS MAY BE
PRESENT.
Accidental Release
Spill Release Procedures:SPREAD ABSORBENT MATERIAL OVER AREA. WIPE UP
OR SCRAPE UP MATERIAL. WASH AREA W/SOAP & WATER.
Handling
Handling and Storage Precautions:NONE
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NOT REQD IN MOST INDUST APPLIC. CONSULT SAFETY
OFF FOR APPROP REQ.
Ventilation:LOCAL EXHAUST: GOOD GENERAL VENTILATION IS USUALLY
ADEQUATE.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:CLEAN BODY COVERING CLOTHING.
Supplemental Safety and Health
Chemical Properties
HCC:C2
Boiling Pt:B.P. Text:428F
Vapor Density:>1.0
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:0-1
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID CONTACT W/EPOXY COMPOUNDS UNDER
UNCONTROLLED CONDITION
Hazardous Decomposition Products:TOXIC FUMES MAY DEVELOP UPON
INCINERATION
Conditions to Avoid Polymerization:AVOID CONTACT W/EPOXY CMPDS UNDER
UNCONTROLLED CONDITIONS.
Disposal
Waste Disposal Methods:BURY IN APPROVED LANDFILL IAW FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.